![Arduino UNO DIP with Cable](http://www.electronifyindia.com/cdn/shop/files/AQ58AA.webp?v=1711191826&width=1445)
Description
It Arduino UNO DIP with Cable, Arduino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins, 6 Analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller that simply connects it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Arduino Uno is the successor to the Arduino Duemilanove which is a microcontroller board based on a removable, dual-inline-package (DIP) ATmega328 AVR microcontroller.
Cable: This is a Cable For Arduino UNO/MEGA (USB A to B)-1feet, you can use it to connect Arduino UNO or any board with the USB female A port of your computer. Length is approximately 52 cm. Cable color and shape may vary slightly from image as our stock rotates. This is a standard-issue USB 2.0 cable. the kind that’s usually used for printers, Arduino, etc. Compatible with most SFE designed USB boards as well as USB Arduino boards like the Uno.
Pin Configuration
D0 (Rx) & D1 (Tx) | Used to receive and transmit TTL serial data |
D2 & D3 | These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value |
D3, D5, D6, D9, D10, D11 | Provide 8-bit PWM output with the analogWrite() function |
D11 (MOSI), D12 (MISO) & D13 (SCK) | These pins support SPI communication |
A4 (SDA) & A5 (SCL) | Support I2C (TWI) communication using the Wire library |
AREF | Reference voltage for the analog inputs |
Reset | Bring this line LOW to reset the microcontroller |
Features
- Automatic reset during program download
- Power OK blue LED
- Green (TX), red (RX), and orange (L) LED
- Auto-sensing/switching power input
- Small mini-B USB for programming and serial monitor
- ICSP header for direct program download
- Standard 0.1” spacing DIP (breadboard friendly)
- Manual reset switch
Specifications
Microcontroller | ATmega328P |
Operating Voltage | 5 V |
Input Voltage(Recommended) | 7-12 V |
Input Voltage(Limit) | 6-20 V |
Analog I/O pins | 6 |
Digital I/O pins | 14 |
PWM Digital I/O pins | 6 |
DC current per I/O pin | 40 mA |
Clock Speed | 16 MHz |
SRAM | 2 KB |
Flash Memory | 32 KB |
EEPROM | 1 KB |